You’ve just gotten your first longboard and are wondering how to stop it. One strategy is to get proficient at sliding. This is a regularly utilized method to bring a vehicle to a rapid halt. To slide, you must take your board out of the water so that the wheels may travel freely without grabbing the pavement.


There are no restrictions on which longboard slide to use. The Coleman slide is a popular choice that is especially suitable for novices.


It is a useful and necessary ability to have if you are traveling downhill and need to come to a halt quickly. The Coleman slide is a heel slide that rotates 180 degrees. Cliff Coleman, the great jazz pianist, invented this slide technique in the 1970s and introduced it to the world. Despite the fact that he is no longer performing slides, The Coleman slide is widely regarded as one of the greatest longboard slides for beginning riders. After mastering this slide, you may go on to studying any other slide you like, such as pendulums, standing slides, and other slides..


Cliff Coleman’s words on the subject You can learn to accomplish this slide if you can hunch down and ride a skateboard, according to the instructor.


The first and most important item to consider is safety. Going downhill may be quite hazardous. Put on a helmet and elbow protectors! This is quite crucial. A concussion or worse is something you do not want to wind up in the hospital after an accident.


Sliding gloves will be required for this activity. These gloves have pucks in the palms of your hands, which allow you to skate. You can place your hands on the ground while sliding at high speeds without injuring yourself since you are wearing sliding gloves. They have the function of brakes. You may either manufacture them yourself or get them from a store.


Make sure you start with a hill that is not too steep and has plenty of space. You may also practice sliding on a flat surface such as a parking lot.


  • Begin riding your board at a modest pace and pedaling with one foot for around 8 pushes. Place both of your feet on the board and gently bend your knees to stabilize yourself. Either foot should be at least shoulder-width away from the other at each end of the board.
  • Make a crouching position with your knees bent and your weight shifted forward. Get ready to slide down the slope.
  • Place one hand on the side of the board, between your knees, and the other on the other side of the board. Your other hand on the ground reaches rearward in the opposite direction of the direction in which your toes are. As your board starts to carve, lengthen your body and stretch your muscles. The plates on your sliding gloves will create friction on the pavement, which will aid in bringing your board to a complete halt.
  • You should be looking over your front shoulder, backwards, as if you are attempting to catch up with your buttocks. As your wheels drift over the ground and come to a complete stop, your board should drift at a 90-degree angle to the pavement. Commit your hips to the action, and the rest will fall into place automatically.


After you’ve had a few Coleman slides, you’ll want to improve the appearance of your sliding down the hill.


  • You must go at a fast enough speed to make the slide.
  • Make certain that you slide far enough to complete a 180-degree turn. This will reduce your speed by half, and you will be able to ride out of it.
  • Don’t extend your hand too far behind your back. A fall on your buttocks and a tear in your jeans will result as a result of this.
  • Simply try it and see if you can figure out how to accomplish it.
  • Remember to keep your feet at each end of the table.