How to Unclog a Toilet Containing Solid Waste

How do you unclog a toilet with solid waste? Do not worry if you ever find yourself in this unfortunate circumstance. There are many approaches to rapidly and effectively resolve the issue.

If you are unfamiliar with the procedure, treating a blocked toilet with feces might be challenging. Occasionally, the toilet might get clogged owing to issues such as:

  • Improper drain function
  • Improper flushing system
  • Stubborn feces that refuse to flow
  • A blockage in the pipe
  • The size of the feces

All of these reasons may lead to a clogged toilet, which requires prompt attention lest it emit an unpleasant odor that is difficult to endure. Continue reading if you’re in need of information about How to Unclog a Toilet With Poop Still Inside.

This might be a highly awkward scenario if you have unexpected visitors. Therefore, we have arranged a number of methods and techniques with which you may immediately unclog the toilet without placing yourself in an awkward position.

How to Unclog a Toilet Containing Solid Waste – 5 Methods

Method 1: Remove feces with a plunger/toilet brush.

Using a toilet brush or plunger to eliminate all sorts of feces clogs is the quickest and most efficient method for unclogging a toilet. It is often the first way that springs to mind since many toilets are equipped with brushes for such reasons. Additionally, toilet brushes are used to clean the toilet seat and any stains surrounding the toilet seat or bowl. The toilet brush is a valuable piece of equipment, however it is mostly used to remove little, easily-drained feces.

Additionally, it treats obstructions that do not take a great deal of effort. Simply use the toilet brush or plunger to clean and unclog the residual feces in the toilet, then apply pressure. Press the flush button and let the water to flush away any remaining waste and residues. It may take a few minutes, but you will be able to remove all of the feces from the blocked form.

You must use extreme caution while dealing with backed-up feces, since exerting too much force might cause water or backed-up feces to pour over the toilet seat and splatter all over your body. If feces are not obstructing the toilet, then there may be an issue with the drain pipes, which may be blocked with debris or other particles.

However, there is a chance that feces will not be effectively unclogged with the aid of the toilet brush; in that case, you will need to use a more efficient technique.

A toilet plunger is another method for unclogging a toilet since it is a mess-free, simple, vacuum-generating method for unclogging a toilet. A heavy-duty plunger is ideal for the task and will always prevent awkward situations. While using a toilet plunger, you are need to have a trash can or bag to dispose of the blocked material. Additionally, it would be prudent to use rubber gloves to prevent contamination. This is the way I like for How to Unclog a Toilet With Poop Still Inside.

Method Two involves commercial drain cleaners

At the business level, drain cleaners are used to unclog toilets with a lasting impact. A blocked toilet may be very annoying and intolerable; consequently, urgent action is required to prevent such problems. There are commercial drain cleaners that are effective and safe to use.

These drain cleaners include Thrift T-600, RID-X Septic tank Enzyme Treatment, Bio-Clean drain, Drano Max Gel Clog Remover, Green Gobbler Ultimate Drain Cleaner, and more drain cleaners that are used to treat all sorts of drains and remove all clogging issues with toilets. The majority of these drain cleaners are also environmentally friendly.

Highly recommended, these drain cleaners include active chemicals that effectively eliminate blockages.

Remember that alkaline-based cleansers are some of the best cleaning agents, as well as the quickest-acting chemical cleaners that can unclog a toilet within seven minutes.

All commercial drain cleaners create heat, induce oxidation, and confirm acid hydrolysis with enzymatic operations in order to clear obstructions and clogs caused by the solidification of feces in the toilet.

In the process of How to Unclog a Toilet With Poop Still in It, I would recommend avoiding the use of acidic or alkaline drain cleaners, since they may cause corrosion of the pipes if they get clogged. Therefore, it may be preferable to utilize an alternate approach to clear the obstructions in order to prevent any unwanted harm.

Method Three: Clothing Hanger

The third approach for How to Unclog a Toilet With Poop Still in It is messier than the previous two. A metal cloth hanger is also used to prevent feces from clogging a toilet. A plastic with a coating is ideal for removing clogs of feces from the toilet. With a cotton hanger, you may either scoop or slice the feces. Cloth hangers are ideal for the job since the wire is so flexible and sturdy that it may be used in any direction. You must wear plastic or rubber gloves when using the cloth hanger to protect your hands from dirt and contamination.

You may also use pliers to unwrap the hanger and produce a medium-sized hook. The hanger should be inserted into the toilet and forcefully pushed if a blockage is sensed. After removing the hanger, the toilet should be flushed to remove any remaining debris. This allows you to determine if the obstruction has been removed.

Method Four: Bleach, Peroxide, and Additional Household Chemicals

This article explains How to Unclog a Toilet With Poop. Different household chemicals, such as bleach, vinegar, and peroxide, may also be used to remove blocked feces from your toilet. Additionally, baking soda is utilized to remove blockages. However, if you find yourself in this circumstance, you must evaluate all the home chemicals that may be used to unclog the toilet.

However, these chemicals must be utilized according to the recommendations; for example, if you wish to use vinegar, you must gently pour the chemical over the feces so that it may finally trigger a chemical reaction.

By combining vinegar and hot water, you may effortlessly eliminate all forms of grime. Alternately, you may add baking soda, vinegar, and boiling water to the mixture and let it sit for a while to see the consequences. Additionally, you may leave it overnight and flush it in the morning to see the change. Other chemicals and substances, such as Coca-Cola, plastic wrap, and boiling water, may be used to unclog a toilet.

Coca-Cola or bleach are also essential ingredients for cleansing the clogs in your toilet. Hot water and detergent may also be used to build pressure to force stuck feces down the drain. It may be necessary to repeat the treatment two or three times each day to get optimal results. You may also increase the amount of detergent or bleach used to eliminate any leftover poo stains that are resistant to removal.

Hydrogen peroxide is an efficient chemical that is also used for decongesting and destroying microorganisms. Before using hydrogen peroxide, vinegar, baking soda, and hot water must be poured into the toilet, followed by 14 cup of hydrogen peroxide. If the toilet clog is particularly serious and difficult to remove, it is best to use household bleach, which is more effective than many other treatments.

The fifth method is the toilet auger

A toilet auger is the most effective instrument for unclogging a toilet and allowing waste to flow freely. A medium-sized cable is ideal for unclogging a toilet since it can split the obstruction into pieces and latch onto it.

Indeed, this is one of the best and simplest methods for How to Unclog a Toilet With Poop Still Inside. With the assistance of a toilet auger, you will not be able to corrode the porcelain or other pipes while removing stubborn stains and obstructions.


The following are questions concerning How to Unclog a Toilet With Poop Still Inside.

How to decompose feces in the toilet bowl.

Various chemicals, detergents, household ingredients, and plungers are used to eliminate all types of toilet clogging. With the aid of chemicals and common household items, all of the severely developed clogging must be eliminated entirely. The stool can also be dissolved using baking soda, vinegar, and warm water. Using these chemicals the breakdown of poop in the toilet bowl is possible without damaging the bowl, sink, pipes, and other draining systems. Bio-enzymatic liquids and detergents should also be used for dissolving hard poop immediately to make it flushable.

Why does poop clog the toilet?

The poop clog toilet because of its composition and hardening effect. When the poop is left in the toilet for a long time without getting flushed or drained, then there is a possibility that clogging might take place and the entire toilet pot shall be clogged. The large poop excretion also might result in the clogging of the toilet. Your poop can become big due to constipation, Megacolon, and Encopresis which become the major causes of the large poops excretion. Poop clog toilets because sometimes toilets are not flushed properly, therefore, clogging develops in the bowl.

How to unclog a toilet without a plunger with poop?

You can use other household or professional methods to unclog the toilet if you do not have a plunger at home. You can also use the toilet brush to easily unclog the clogged feces along with removing the stains. Dish soap is also a good alternative that can be used instead of the plunger. Along with this also add hot water to unclog the poop without any difficulty. The force of water can easily dislodge anything that is causing clogging in your toilet. The plunger is considered an essential bathroom asset, but it can be replaced with other tools as well.

How to clean the toilet plunger?

Few necessary steps should be followed while cleaning the toilet plunger after being used to unclog the poop from the toilet. The easiest way to clean the toilet plunger is directly soaked it into the disinfecting agent so that all the germs and smells can be washed off. The toilet plunger is considered the filthiest tool in the bathroom, which needs to be cleaned very often because it harbors plenty of bacteria and germs. Soak the plunger into the chlorine bleach that should be poured directly into the toilet bowl.

You need to insert the toilet plunger into your bleach so that it can become germ-free. After a few minutes, flush off your toilet and let the plunger rinse in your fresh toilet water. Your plunger is now all set to be used again and is completely clean.


There is no proper or fixed time for your toilet to clog, therefore, you shall be having all the tools and accessories that will help you to unclog the poop from the toilet immediately. We all know that toilet clogging can create different issues for house owners that can directly turn into embarrassing moments.

You can use different methods whether they are traditional, homemade, or modern methods all will help you to get rid of this mess. It should be your priority to restore your toilet as soon as you come to know about the clogging of the toilet.

Still, if you do not have the right plunger at home, then you must use professional chemical agents, tools, and ingredients right away to dissolve the feces. Pouring hot water in the toilet bowl is also a good idea for cleaning the bowl.

Unclogging the clog and dissolving the poop, this task can be tricky sometimes if you do not have the right tools, but there are various other effective ways for drain cleaning.

We hope this article has helped you learn How to Unclog a Toilet With Poop Still in it.

Roomba Home Base Not Working: Seven Rapid Solutions (2022)

Roombas perform their duties with minimum oversight.

When you have one, manual cleaning is at an end.

Until your Roomba Home Base no longer functions, that is…

But, don’t give yup on your Roomba yet.


Keep reading to discover:

  • Reasons why your Roomba Home Base is inoperable.
  • Seven easy and quick repairs for a malfunctioning Roomba Home Base.
  • Instructions for performing a soft reset or factory reset on a Roomba.
  • Whether your Roomba’s Home Base requires cleaning and how to clean it.

Why doesn’t my Roomba home base work?

Your Roomba home base is not functioning due to unclean contact points, a broken outlet, or power adapter disruptions. This issue also occurs if your Roomba’s battery has to be repositioned or replaced. In certain instances, you may be required to reset your Roomba to factory settings.

Roomba home base not functioning: seven simple remedies’

1: Scrub the Home Base and charging ports

It is extremely vital to maintain the charging dock spotless.

I’m not referring to routine cleaning and dusting. It is preferable to perform it at least once every week.

Does your Roomba perform daily vacuuming?

The bare minimum would be to clean its Home Base.

The Roomba, like you, does not want to return home to see dust and dirt.

Therefore, charging stations must be immaculate. These are the little metal strips on which your Roomba may charge.

But what occurs when garbage and filth accumulate?

This impedes the free flow of electricity to the charging terminals. In addition, your cleaning robot will not receive a charge.

  • This may explain why your Home Base is not functioning.
  • Only rubbing alcohol is required to clean your charging dock.
  • Melamine foam or a Magic Eraser.

Follow the procedures below to clean your docking station:

  1. Unplug the docking station.
  2. Apply alcohol to the melamine foam or Magic Eraser.
  3. Use the damp melamine foam to clean both charging poles.
  4. Using the microfiber towel, thoroughly dry the charging ports.
  5. Clean the dock’s hardware as well as the Roomba’s charging ports.

Watch this video to learn how to clean the charging dock properly:

Make sure not to fully saturate the melamine foam or Magic Eraser with water. And wait several seconds before reconnecting the power cord.

This is to ensure that no electrical accidents occur.

Then, attempt to recharge your Roomba at the Home Base.

2:  Restart your Home Base

The charging dock can also be rebooted as a simple solution.

“What in the world is power cycling?”

Power cycling is a word used to describe turning off any electrical item. And turning it on again.

The traditional on and off operation.

This is frequently employed to repair problems in electrical devices.

Restarting the Home Base of your Roomba will aggressively discharge extra electricity from the device.

Here’s how to restart your Home Base’s power:

  1. Unplug the adaptor from the charging dock.
  2. Additionally, disconnect the other end of the power adapter.
  3. After five minutes, reconnect both ends of the power adapter and test the device.

When the dock has been entirely emptied, it will feel chilly to the touch.

After cycling the power, connect your Roomba to the Home Base to check if this resolves the issue.

3: Adjust the battery location

You may have thought, “The charging dock’s indicator light has gone out. Is it broken?!”

It is usual for the charging station light to turn off once Roomba has returned home to charge.

This is essentially your Roomba’s way of saying, “I’m resting and shutting out the lights. Now, get away.”

However, if your Roomba is still not receiving sufficient charge after docking, the issue may not be your Home Base.

It could be because the Roomba’s battery pack has been misplaced.

Fortunately, the problem is simple to resolve.

Here’s how to reposition the battery on the Roomba:

  1. Turn the Roomba off and turn it over.
  2. Using a screwdriver, remove the Roomba’s screws.
  3. Remove the battery cover and secure the batteries by pushing them down.
  4. Replace the battery cover and the screws in a secure position.

If this approach does not resolve the charging issue, you should consider purchasing replacement batteries for your Roomba.

Note: iRobot exclusively recommends the use of its own replacement batteries. Using a third-party pack may void the warranty on your Roomba.

4: Change the electrical outlet

Try a different outlet to plug in your Home Base.

Occasionally, tiny disruptions can alter the electrical flow. Consequently, the charging dock is not receiving sufficient power to charge the Roomba.

Note: Instead of a charging strip, you should use a wall outlet to charge your Home Base.

Unplug the power source of the charging station from the current outlet. Move it to a different wall outlet.

Determine whether the robot vacuum can now be charged from the dock.

The power cord of the Home Base may also be creating this issue. Think about replacing it.

5: Perform a factory reset on the Roomba

If nothing has worked thus far, you might attempt to reset your Roomba to factory settings.

Additionally, resetting will eliminate any OS bugs that prevent the Home Base from charging.

This has a decent possibility of resolving the issue.

Warning: A hard reset is irreversible. It will erase the memory, preferences, and other settings of your Roomba.

To reset Roomba to factory settings in manual mode:

  1. Locate the “CLEAN” button on the Roomba.
  2. Press and maintain the CLEAN button for approximately 10 seconds.
  3. Release the button when the Roomba’s LED begins blinking and wait.

It takes the Roomba approximately one minute to do a factory reset. Simply reconfigure the parameters after completion.

To reset your Roomba 600, 800, 900, E, I, and S series to factory settings:

  1. Launch the iRobot Home application.
  2. Your smartphone and Roomba must be connected to the same Wi-Fi network.
  3. Locate the Settings option in the drop-down menu.
  4. Select factory reset.
  5. After your Roomba has restarted, the reset is finished.

6: Directly charge your Roomba

Did you know that you can charge your Roomba by plugging it directly into an electrical outlet?

It requires no charging dock!

Simply connect a power adapter to the Roomba’s independent charging connector.

If the Roomba is automatically charging, the issue is not with your vacuum bot.

This also leads us to the ultimate solution.

7: Remove and replace the dock


Comparable to a battery, the charging dock can be replaced.

Both the Home Base and the battery can be maintained, but sometimes old age catches up with them.

If you’ve had your Roomba for a time, you should consider replacing the dock, especially if it no longer functions properly.

Defective Home Bases are detrimental. Especially if cleaning, resetting, and replacing the power cord or outlet fail to resolve the issue.

Replace the dock to avoid unnecessary inconvenience.

Or better yet, get a new Roomba.

Can Chromecast Be Used With Roku TV? 7 Simple Steps (2022)

Android TV’s direct opponent is Roku TV.

Android is a product of Google. And Chromecast is too.

Therefore, Chromecast would not be functional with Roku, correct?

Or perhaps not?

Keep reading to discover:

  • Seven simple steps for using Chromecast on Roku TV
  • The requirements for casting to your Roku TV.
  • Alternative casting methods to Roku TV without Chromecast.
  • And much more…

Can Chromecast be used with Roku TV?

Chromecast is compatible with Roku TV. Chromecast is compatible with all devices having an HDMI connector. And all Roku TVs have this feature, independent of manufacturer. Plug the Chromecast directly into the Roku TV. Then, switch your television to the proper input. And you may now cast media files to your Roku TV.

Seven steps to use Chromecast on Roku TV

1: Connect the Chromecast to the HDMI port on your Roku TV.

There are several Roku TV makers. Among them are TCL, RCA, Sharp, Hisense, and Westinghouse.

And all of the Roku TV types have numerous HDMI ports. Connect your Chromecast to one of these devices.

2: Plug the Chromecast into an electrical outlet.

Your Chromecast will not function unless it is powered on.

Therefore, attach the power adapter to the Chromecast. Then, connect the adapter to a power supply.

3: Select the proper input source on your Roku TV

HDMI ports on Roku TVs are numbered sequentially. Check the number of the HDMI port into which the Chromecast was inserted.

It could be HDMI 1, HDMI 2, or a similar designation.

Then, change the input of your Roku TV to the corresponding HDMI port.

The Roku TV’s Home page provides the simplest method for changing the input. Additionally, you can do so using the Settings menu.

But I will provide instructions for both.

How to change the input on your Roku TV using the Home screen

  1. Press the Roku remote’s Home button.
  2. Click the right arrow button to navigate to the Channels section.

Determine the appropriate HDMI input and pick it.

How to change the input on your Roku TV via the Settings menu

  1. Scroll down and select Settings from the Home screen.
  2. Choose TV Inputs
  3. Press the right arrow button on the remote.
  4. Select the appropriate HDMI input.

If this is not your first time using Chromecast, you should be able to cast content. You may proceed to Step 7.

However, if you have not yet set up your Chromecast…

Continue to the following steps.

4: Download and install the Google Home application on your mobile device.

The Google Home application is downloadable on iOS and Android devices.

5: Connect Chromecast to the Google Home app.

Step 1: Open the Google Home app on your mobile device. Then, click the Begin button.

Step 2:  Sign in to your Google account.

Step 3: Create a home for your devices as the third step. Create a nickname for your residence. Then enter your address. Then press Next.

Step 4: The application should begin searching for devices. When the app asks which device you wish to configure, choose Chromecast.

Step 5: Click the Next button once the software discovers your Chromecast.

Step 6: A code will appear on the app and the Roku device. Verify that the codes match. Then select Yes to continue.

Step 7: Select the location of your Chromecast in the seventh step. This might aid in naming and arranging Google Home app-enabled gadgets.

Step 8: Connect your Chromecast to WiFi as the eighth step. Make sure it’s the same one your phone is using.

That is all. Chromecast and the Google Chrome application are now integrated.

If you have a problem with linking, you may just repeat the instructions.

6: Integrate services with your Chromecast

To cast from apps such as Netflix or Spotify…

These applications or services must be added to Chromecast. This is how:

First, select Media from the Google app’s main screen.

You will see categories such as Video, Music, and Podcast in Step 2. Choose the category of the app from which you wish to cast.

If it is a streaming service, such as Netflix or HBO Max, choose Video.

Select Music for apps like Spotify and Soundcloud.

Step 3: Select the desired application. And click the Link Account button. Next, enter your account information.

7: You may begin casting.

Simply tap an app on your phone from which you would like to cast.

For instance, if you wish to cast a Netflix video on your Roku TV using Chromecast…

Simply launch the Netflix app on your mobile device. Then, tap the casting icon in the app’s upper-right corner. It’s the one with the box containing the WiFi icon.

The window should appear. Choose your Chromecast there.

You should now be able to view Netflix on your Roku TV.

And the approach is identical for all other applications.

Now I realize that a visual guide would also be helpful.

Check out this brief video demonstrating how to use Chromecast:

Can Roku TV be cast without Chromecast?

Roku TV may be cast without Chromecast. You may utilize either a laptop or a mobile device. Simply confirm that your Roku TV and other devices are connected to the same WiFi network. And that they both own the application you wish to cast from.

When Chromecast debuted in 2013…

Currently, most mobile devices and laptops cannot cast.

And the majority of televisions are not intelligent.

However, technological improvements…

Today, it is simple to cast from a smartphone or laptop to a television. Even without a third-party device such as Chromecast.

I will explain the casting procedure using a phone and a laptop.

Nevertheless, you must first prepare your Roku TV for casting.

How to set up your Roku television for casting

There are two prerequisites before you can cast from another device to your Roku TV:

Your Roku TV and the other device must first be connected to the same WiFi network. If not, your device will be incapable of detecting your Roku TV for casting.

Second, your Roku TV should have the same streaming application as your mobile device.

Therefore, whether you are casting from Netflix or Spotify…

You must ensure that your Roku TV has this application.

Now, if your Roku TV lacks it…

You can download and install it directly from the Roku Channel Store.

How to add applications or channels to a Roku TV

Step 1: Press the Home button on your Roku control.

Step 2: Navigate to and select Streaming Channels.

Step 3: Select Search Channels in. Then, enter the app or channel that you wish to install.

Step 4: Once you’ve located the desired channel, click the Add Channel button.

Step 5: If you have a Roku PIN, enter it here.

The channel should then begin downloading and installing on your Roku TV.

Now, prior to casting on your Roku TV…

You must also confirm that your television has the most recent upgrades.

Roku operating system (OS) obsolescence is a typical cause of casting failure.

How to upgrade the OS on your Roku TV

  1. Press the Home button on the Roku remote control.
  2. Scroll down and click the Settings option.
  3. Click System.
  4. Select the System update option.
  5. Select the Verify Now option.

If updates are available, your Roku TV should immediately begin downloading them. Simply wait for the download and installation to complete. Your television should then restart.

So, let’s conduct a recap.

Have you confirmed that your Roku TV and other devices are connected to the same WiFi network?

Have you updated your Roku television?

And were you successful in installing the required app or channel?

If you answered affirmatively to each of these…

It indicates that your Roku TV is now capable of casting.

How to cast from a smartphone to a Roku TV

Step 1: On your mobile device, launch the app from which you will cast.

Step 2: Play a media file from the application.

Select a movie or series, for instance, if you’re casting from Netflix. And then press the play button.

Step 3: Locate the casting icon within the smartphone application. Next, tap it.

The third step is displaying a list of available devices. Choose your Roku television from the list.

The application should then open instantly on your Roku TV. And the content you chose on your mobile device should play on your television.

How to cast from a laptop to a Roku TV

Step 1: Open a Google Chrome web browser on your laptop as the first step.

Using a different web browser?

If so, Chrome can be downloaded and installed directly from its official website.

Chrome will be utilized because it provides an inbuilt option for casting. Not all browsers support it.

Step 2: Open the webpage from which you will be casting. Streaming services with official websites include Netflix and YouTube.

Again, confirm that your Roku TV has the application version of the website you intend to use.

Step 3: Select a media file from the opened website in the third step.

Step 4: Click the Chrome browser’s menu icon. It is the one with three vertically aligned dots.

It is located in the upper-right corner of the browser.

Step 5: Select Cast from the menu.

The cast tab should display a list of all the devices that can be cast to. Choose your Roku TV.

Then, your Roku TV should play the media file you downloaded from the website.

Can Grass Grow Through Landscape Fabric

The answer to this question is no, grass should not be planted over landscape fabric. The primary cause is an interference with the root’s growth. For turf grass to grow, there must be a depth of at least 6 inches of soil. Landscape fabric interferes with natural processes that are intended to improve soil quality, such as composting, mulching, and erosion control. If you want to successfully plant turf grass, you need to be aware of the proper procedures to follow.


Can you plant grass on top of landscape fabric?


It is imperative that you refrain from laying sod on top of the soil in areas where landscape fabric has been installed. There is a barrier that prevents sod from forming roots that are both deep and strong. Landscape fabric can interfere with the natural process of decomposition that occurs in the soil when leaves and grass clippings are buried there.

If you decide to lay sod, you must take precautions to prevent the sod from coming into contact with either the soil or the water. If you are going to plant sod in an area that has good drainage, you might want to think about using a soil conditioner first to help prevent soil erosion before you plant the sod.


Will ground cover grow over landscape fabric?


If you mulch with plastic or landscape fabric, your groundcovers won’t be able to spread as they would otherwise. Maintain a soil that has a trace amount of moisture for approximately one week after the top layer has begun to dry out. You will need to water your groundcover more frequently if you want it to remain in place for a longer period of time if you want to keep it in place.

You can accomplish this goal by utilizing a sprinkler system or a garden hose. If you don’t have access to one of these, you might want to think about using an irrigation system that has a drip system instead. This will enable you to regulate the amount of water that you put into your garden.

What can I put over landscaping fabric?


In addition to the weed control benefits provided by the landscape fabric itself, applying mulch on top of it will also improve the yard’s aesthetic appeal, as well as add organic nutrients to the soil. Mulch can be spread around plants and shrubs to a depth of up to 3 inches in order to cover the landscape fabric and aid in the prevention of weed growth from the very beginning.


Do you need to remove grass before laying landscape fabric?


If any sprigs of grass manage to push their way through the landscape fabric and emerge through the pea gravel, remove them as soon as possible to prevent the grass from re-establishing itself. The energy reserves in the plant’s roots will be depleted if the growth is not brought under control, and the plant will perish as a result.

If the grass is allowed to grow unchecked, it will eventually outcompete the other plants for nutrients and water, and the soil will eventually become too dry for the plants to survive. This will happen if the grass is allowed to grow unchecked. In this particular scenario, you will be required to replace the plant with a new one.

Do you need to remove grass before mulching?


You don’t even need to mow the grass before you put down the newspaper and mulch; just make sure that the newspapers are thick enough to block all light (10-12 pages thick, overlapping each other by 4-6 inches), and that the mulch is heavy enough to block air flow (six inches of mulch is a great depth to start with, but you can add more if you want).

When you’ve finished putting everything else in its place, it’s time to turn your attention to the plants. Depending on what it is you want to accomplish with your garden, you should have at least three distinct kinds of plants from which to choose. You might, for instance, have a combination of annuals and perennials, shrubs and trees, trees and grasses, all of which are in varying stages of growth.

If you have more than one kind of plant that you want to cultivate in the garden, then you will need to make a decision as to which kind of plant you will use during each stage of the life cycle of the plant. The following advice will assist you in selecting the most suitable plant for the task at hand.


Can you Rototill grass?


A rototiller is an excellent tool to have on hand when you need to re-sod a large lawn or re-seed a small garden. Renting a rototiller from Big Rentz will allow you to complete the task successfully.

See more :


Best Worx Lawn Mowers

Best Snapper Lawn Mowers

The best Ryobi lawn mowers


Roomba Stuck Under Bed or Couch? [2022 Guide] Seven Tips

The whole point of a Roomba is to save you time and effort when you clean.

Still, nothing is worse than getting home and finding your Roomba stuck under the bed or the couch.

Roomba’s worst enemy is furniture like beds, tables, couches, and more.

“What are we going to do about them?”

Read on to learn:

  • Why do Roombas get stuck under the bed or couch?
  • Here are seven ways to keep your Roomba from getting stuck under things.
  • How to get your home ready for your Roomba to clean it without any problems.
  • And much more…

Why does my Roomba get stuck under my bed or couch?

Because your bed or couch is low, your Roomba gets stuck under them. Wires and cables that are tangled up on the floor are another reason. Roombas can get stuck when the brush and wheels are clogged.

7 Tips to keep your Roomba from getting stuck under your bed or couch 

1: Use furniture risers

One easy way to avoid this problem is to buy furniture risers.

Furniture risers give your low-lying furniture the extra height it needs.

You can put them on almost any kind of furniture leg.

You can get them in different styles and heights to meet your needs.

“My bed is too heavy, though.”

Don’t worry.

Up to 1300 lbs of weight can be put on furniture risers. Besides that, they are cheap and easy to get.

They are without a doubt the best way to get rid of Roombas that get stuck under your bed.

Note: Before you buy a robot cleaner, make sure to check how high it can reach.

2: Use bumper extenders.

We all know that preventing a problem is better than having to get a Roomba out of a jam.

So why not add an extender to the bumper?

“What is that?”

It looks like a cone and has little rubber feet that you can glue to your Roomba’s bumper (and other robot vacuums).

With a bumper extender, your Roomba won’t be able to get under furniture from which it can’t get out.

They have more than one use and can also be used to lift other electronic devices.

What a lot of stuff!

Use a 3M adhesive hook as an extender for your bumper.

The way it works is shown in this video:

3: Use spare pool noodles

If you have some pool noodles that you don’t use, here’s a way to put them to good use.

  1. Cut pool noodles to the length of your couch.
  2. Put them where they fit between the bottom of your couch and the floor.

This will stop your robot vacuum cleaner from getting into the room. If your Roomba hits the pool noodle, it will change direction.

And just like that, you found a way to stop your Roomba from going under your couch.

4: Give your Roomba only limited access.

You can also try making it hard for your Roomba to get in.

You can put up real walls like in the last tip, or you can buy virtual wall barriers.

Sure, the second one costs more. But they save you the trouble of having to cut and glue pool noodles together.

Your Roomba can’t get to dangerous parts of the house because of virtual walls.

You can also get the iRobot mobile app and use it.

There, you can control your Roomba as if it were really there. And stop your robot vacuum from going where you don’t want it to.

5: Make sure your home is well-lit.

You must be wondering, “Why do I need to keep my lights on?”

It’s easy to figure out: Your robot vacuum moves around with the help of optical sensors.

For these optical sensors to figure out what’s going on around them, they need light.

So, keep at least one light on in a room if you don’t want your Roomba to get stuck under furniture while it’s cleaning.

6: Buy furniture with legs.

If you want to replace old cabinets and couches, get raised furniture.

This is a surefire way to keep your robot vacuum from getting stuck under something.

Also, raised furniture gives you more storage space and room to stretch your legs.

It also gives the person helping you clean enough room to move around.

7: Make sure your home is ready.

Robots that clean have sensors that help them avoid hitting things. But they aren’t smart enough to get through wires, cables, and other obstacles.

To make sure your robot cleaner works well, make sure to:

Fix wires that are a mess

Better arrange your computer cables and other wires. Keep them as close as possible to the wall.

So, your Roomba will be able to clean without getting stuck.

Also, this keeps everyone safe and keeps accidents from happening.

Clear the floor of any mess.

Get things like toys and clothes off of your floor.

For your Roomba to clean, it needs space. Take away anything that could get in its way.

If there are things in the way, your robot cleaner will stop working.

On the other hand, smaller pieces like Lego can damage the parts inside your Roomba.

So be sure to clean them up as well.

Put chairs away

In the dining room, lift the chairs up and put them on top of the table.


Roombas often run into the legs of chairs. Then they can’t get out.

Helping your little Roomba do a task by hand can make it work better.

Get your Roomba clean.

I can’t say enough about this.

For your Roomba to work well, you need to clean it often.

The Roomba’s brush and wheel will get clogged up with pet hair, dust, and fluff over time.

This will make your computer more likely to make mistakes and have other issues.

Roomba maintenance

Care for and maintenance of a Roomba are the same no matter what series or model it is.

So clean your Roomba often to keep it running like it’s brand new.

This will also save you time and money on repairs that could be expensive.

Rebounder Trampoline Exercise Guidelines And Proper Alignment

Hello, I am Nicholas Nilfex. This is my webpage. Today, I’ll share with you some rebounder trampoline exercise advice on how to achieve good form and alignment while rebounding. This material is ideal for novices. Now, we always begin with our feet. The feet are the body’s foundation. You begin with the foundation, just as you would when building a house, because the foundation will significantly effect the entire chain of alignment in the body. Therefore, we must stand with our wheat evenly distributed from right to left, and I advise novices to adopt a wider posture. Therefore, your feet are approximately shoulder-width apart in parts of my stuff. As such, I’ll be bouncing in a more confined posture.

Rebounder Workout For Beginners!

If this feels too unstable for you, simply spread your legs wider. We must also consider the fact that the weight distribution in each foot is unique, therefore attention must be taken in this regard. While pronating, you do not roll into the inner arch of your foot. How do my knees buckle when you can damage yourself attractively? This is a simple method, but you should be conscious that you are not rolling out supinating. Consequently, we detect equal rooting in the big toe mound. I utilize the pinky toe mound at the ball of my foot for suction cup action. The inner and outer heels are then piled. Now that we have determined that the knees should be aligned with the center of the foot, I like to bounce with bare feet.

If you have knee or ankle problems, or if you feel unstable with bare feet, I recommend wearing running shoes. I must utilize my toes since they assist with balance. Therefore, our knees are monitored such that they are aligned with the foot’s center. So third or fourth toe, and then as we continue to bounce. We maintain a modest knee bend at all times. This is crucial. You must be really cautious. You are not fully extending your knee joint. Particularly when weight-bearing and balancing on a single leg. Now we have that small little bent. As soon as the knees are bent, the weight should be pushed back further. This becomes much more vital in your heels when performing squats correctly. Because there will be additional strain on the knee joint if you carry your weight forward into your toes, keep your weight slightly back, or even further back, when squatting. My knees are following the middle foot’s course. Then, when we ascend the body, there is a hip hinge. Here is a delicate hinge. There is nothing extreme about it.

Rebounder Trampoline Alignment Safety For Beginners!

First, we determine why rebounder trampoline activity is recommended. Then, we believe it is alignment safety and suggestions. This will put strain on the back. It’s just subtle. This hinge is designed to assist you engage your lower abdominals, while also enhancing your ability to press down. And in this kind of trampolining or rebounding, the emphasis is on pushing down throughout these sessions. There are very few maneuvers that ascend, yet we used to ascend as children. There are little trampolines, but the emphasis is on leg and core strength. So press down to burn more energy and build more power in your legs and core, two I’m not bouncing at all, just an inch or so, and I’m forcing the weight back into my heels. When the core is strong, the hips have a slight hinge. Now, when we hinge at the hips, we want to keep a neutral spine, so neutral spine There is a small curve in the lumbar spine, which is the lower back, but you want to avoid arching the back and protruding the tailbone like this. The next day, you will probably have a hurting back if you continue to bounce like this. It indicates that you are not activating your core, therefore you could consider drawing your belly button into your spine and stretching your lower back. Now, as we practice, it may be necessary to take breaks and maintain core engagement. I also recommend cross-training by performing core workouts in addition to your rebounding. If you’re interested, I can provide you with a playlist of core workouts, but practicing them twice a week will have a significant impact on your alignment when you’re bouncing. Now, when we ascend the body, we have a slight hip hinge, a slight knee bend, and we’re equally planted through the feet. Oh, we now wish to call attention to our shoulder, head, and neck. There is a forward head and rounded shoulder action that occurs in many people as a result of computer use and texting. As a result, the pecs become extremely tight, the upper back becomes overstretched and tight, and there is a lot of strain in the neck; therefore, you should consider very gently squeezing the shoulder blades together.

Rebounder Trampoline Benefits!

Due to the alignment of the neck and head, your head weighs about 15 pounds, so it’s crucial that you’re not bouncing in this alignment. If you do, you may have tension in your lower back, but you may also get soreness in your neck or upper back. at your feet, particularly if you are a novice. If you’re apprehensive about your Perhaps you can invest in a handlebar until you gain confidence. However, your chin is in and your core is tight. The eyes are directed straight ahead. That’s why we want to roll the weight, which is still another useful suggestion. From the ball of the foot to the heel, I frequently observe individuals bouncing up and down. You will get tremendously tight calves if you continue to stand on your toes constantly. I know this from personal experience. So, as you bounce, I bounce, land on the ball of my foot, and then roll back to my heel. It’s a rather small movement.

So I hope those were some helpful rebounder trampoline exercise tips. Let me know in the comments section. Check out my beginner content and I hope you have a good time, please let me know if you have any questions.

How to Turn Up the Subwoofer Outside the Car

What are subwoofers?

A subwoofer is a type of loudspeaker that is made to play or send low-pitched frequencies, also called “base” or “sub-base,” to your car stereo.

Are you an audiophile who wants the bass to sound just as good on the outside of your car as it does on the inside? How do you plan to do it? Don’t worry. This article, “How to make subwoofer louder outside the car,” will show you several ways to make your subwoofer louder outside the car.

Subwoofers have a unique shape and are very small, but they can make sound that is rich, clear, and loud.

There are a number of things that usually make subwoofers louder.

1. Power handling

This is the amount of power, in watts, that a speaker can handle.

The manufacturer of each subwoofer will tell you how many watts it can handle at its most. So, how loud you can turn up a speaker depends on how much power it can handle.

RMS power is the amount of power a subwoofer can handle without getting damaged. Peak power is the amount of power a subwoofer can handle in short bursts without getting damaged.

2. Subwoofer size

How loud your stereo is depends a lot on how big your subwoofer is.

Larger subwoofers move a lot of air, so the bass they make is loud and booming.

But if the system doesn’t have enough power, it won’t be able to make good sound. So, the size and power of the subwoofer go together.

3. Sensitivity

This is a way to measure how well the speaker can turn the electrical energy it gets into sound or music.

Decibels are used to measure how sensitive a subwoofer is (dB).

So, the more sensitive a speaker is, the less power it needs to make the same amount of sound as a speaker with less sensitivity.

4. What kind of building it is

The type of enclosure in which the subwoofer is put has a big effect on the sound it makes. In general, a sealed enclosure makes the most accurate and deep sound, while a ported enclosure makes a louder sound.


So, making your subwoofer louder outside your car gives you a better reputation on the street and makes your car stand out at local meets, car shows, and other events.

Ways to Make an Outside Subwoofer Louder

1. Make the bass speaker bigger.

When a subwoofer is big, it lets in more air, and the more air, the louder the sound. So, if you make your subwoofer bigger, the bass will sound and feel better from outside your car.

2. Make a ported box yourself or buy one.

Most of the time, a ported box is a tube that can greatly improve the bass quality.

Ported boxes have a round or square hole in the back that lets air out. This helps the low bass response. The vent moves the sound from the back of the cone so that it mixes with the sound from the front. This makes the bass louder. This design lets bass frequencies that aren’t too loud get out through the opening.

Also, this design makes a sound that sounds like someone blowing through a bottle. These tonal effects give the note played by the cone more power. So, if you want your music to be heard clearly over a wide area, you need a low-tuned. Because the lower the bass, the farther it travels, and the person inside can also feel it.

Also, if you want more bass to travel outside, you should tune your box to exactly 30Hz to get the best quality and loudness of sound.

To sum up, keep in mind that building a ported box will take time, patience, and knowledge of the whole process.

Also, not all subwoofers are made to be put in ported boxes, so make sure you put the right one in your enclosure when you build it.

3. Move the subwoofer to a different spot.

How loud the sound gets depends on where you put your subwoofer.

When the speakers are in the right place, the volume will be very loud. Because of this, you should always put your speakers so that they face the trunk and not the seats. In this position, the subwoofer will send more of its sound outside than inside. Also, putting the subwoofers in the right place will change the bass that comes out of the car in a noticeable way.

4. Make sure there are more subwoofers.

If it is built and used correctly, a subwoofer works like a speaker. Also, the volume of the sound gets louder as the number of subwoofers goes up. So, adding more subwoofers will make the sound loud enough to be heard outside the car.

But if the subwoofers are put in the wrong place or aren’t made well, the sound they make will hurt your ears and lower the quality.

So, the usual number of subwoofers for outdoor use is anywhere from 4 to 18 speakers.

5. Open the sunroof and all the windows

People often say that your stereo will sound best when air is flowing into the car.

So, driving around town with the windows and roof open will make you look cool, but the bass will also get deeper and hit harder.

This is the easiest and least expensive way to make the subwoofer louder on the outside of your car.

6. Add the subwoofer’s power.

As the car’s power goes up, the bass gets louder both inside and outside the car.

What should you do?

By lowering the speaker’s final ohm impedance or by bridging the amplifier, you can change the sound.

7. Put in materials that reduce noise

One of the best ways to make your audio system louder is to add materials that stop sound from getting in.

Noise-deadening materials get rid of noise and vibrations so they don’t compete with each other and make it hard to listen. But your car will tell you which parts to insulate and which you shouldn’t. So, we can’t tell you where to put the insulation.

So, you can ask a professional to help you figure out where to put the noise-dampening materials.

8. Make sure the subwoofer is tuned right.

Tuning your subwoofers will take some time, but it is time well spent. If you tune your subwoofer right, it will add depth and richness to any music and boost the volume of the sound it makes.

If you have never installed a subwoofer before, you might make mistakes that ruin the bass sound outside your car.

So, it’s important to watch out for the mistakes you can make if you want to make your car less loud outside.

  1. The subwoofer wasn’t wired right. Check to see if the wires on the positive terminal are connected to the positive terminal and the wires on the negative terminal are connected to the negative terminal. You can also check the polarity by connecting the terminals to the polarity meter and looking at what it says. The subwoofers’ polarity must be the same. If it isn’t, the bass quality will be affected.
  2. If you put a big subwoofer in a small space, it won’t work as well as it could, which will lower the volume of the sound it makes. So, always choose a subwoofer based on how much space you have in your car.
  3. Your speaker and subwoofer might have a problem with phase. For example, if the speakers play at 80Hz, they need to be set up so that they work well with the subwoofer. Technically, the waves coming from both your subwoofer and your speaker must interfere in a positive way, not in a bad way.
  4. The music you’re playing might have a frequency of less than 40Hz. This will not make the outside noise louder. If you choose a low-frequency sound, you won’t hear anything from the outside because lower frequencies are less sensitive to human hearing.


In the end, a good audio system that is set up right can make your car stand out on the streets or at shows and events. Also, we think the tips above will help you get better bass outside of your car than inside.

Also, keep in mind that even small changes and upgrades to your car will make it better in the long run.

Why Do Monitors Have 2 HDMI Ports

HDMI ports are truly fantastic devices. The content that was initially displayed on a small screen may now be blown up and enjoyed by a whole family or a room full of friends without the need to crowd around the screen to get a good look at what’s going on.

On the other hand, in today’s world, it is not uncommon for a monitor to have more than one HDMI port; in fact, some monitors have as many as three or four HDMI ports. Why would you require such a large number of ports? What kinds of things can you make with them? And is it worthwhile to invest in a monitor that has a number of different ports?

How many HDMI ports do I need in a monitor?


Having only one HDMI port is technically possible, but it may be troublesome if you wish to display information on multiple devices at the same time. According to your lifestyle and the number of HDMI devices you intend to hook into your monitor, the number of HDMI ports you’ll need will vary (TV, projector, etc).

Changing devices requires unplugging an HDMI cord, which is one of the primary reasons monitors began to have extra HDMI ports in the first place.

Why do some monitors have two HDMI ports?


The primary advantage of monitors that come equipped with two HDMI ports is that they enable users to switch between devices without having to awkwardly reach behind the panel and fumble with a tangle of wires. Because there are many ports, you can easily switch the input using the computer or the remote control by simply clicking a button.

Another advantage of having two ports is that you will have a backup in the event that one of the ports becomes damaged or stops working properly. It is inconvenient and costly to have to replace a complete monitor because of a single little port, thus it is ideal to have numerous solutions available.

If you’re working with a limited spending plan, having a monitor with several HDMI inputs enables you to continue using it (or any other device for longer). Because at least one of the HDMI ports has been able to withstand the test of time, there are users who have had the same projector for close to fifteen years and continue to make use of it.

If you have two HDMI connections, your home may essentially become the ultimate media hub, allowing you to seamlessly transition between playing a movie on the projector, watching it on your television, and working on your computer. This requires very little physical effort on your part.

How do I use both HDMI ports on my monitor?


HDMI 1 and HDMI 2 ports will be identified by their respective numbers. Activating a port and bringing up the content presented on that device is as simple as selecting the input you want to utilize.

Let’s say I have an HDTV connected to two laptops. Playing music on one laptop while watching a movie on the other. Seeing your favorite film on a huge screen is almost certainly on your bucket list.

Because your laptop is connected to a ‘HDMI 2’ port on your television, you can access the movie by selecting the ‘HDMI 2’ port on your television. It’s as easy as that!

Can I use two HDMI ports at the same time?


Yes! You can have cables plugged into all your HDMI ports simultaneously. The catch is, you won’t be able to actually use both at the same time. 

You can only have output from one HDMI port at a time, which means you’ll have to choose which device to play the content from. 

Is It Worth Getting a Monitor with Multiple HDMI Ports? 


We are firmly of the opinion that your display should always have more than one HDMI connector available to you. It doesn’t hurt to have more, and you’ll probably discover that you end up using all of them at some point or another. These days, there are a plethora of gadgets that may be plugged into your television as well as your personal computer, such as the video gaming console, Apple TV, or Amazon Fire TV Stick. Believe us when we say that running out of ports is the last thing you want to happen; but, if this does occur, you always have the option of purchasing a switch to address your issues.

Even if you don’t have a purpose for those ports right now, we can assure that you will in the future due to the increasing number of products that are being developed that require HDMI cables. The most recent generation of Xbox consoles does not even come with an HDMI cable. This is because Microsoft believes that consumers already have so many cables plugged into so many different ports that they do not feel the need to give consumers an additional cable.



It is possible to play as many video games, TV shows, and movies as you like with multiple HDMI connectors. Using one port for our TV and the other for our projector is something we enjoy doing. Our favorite feature of the projector, though, is its ability to magnify the image, which heightens the enjoyment of watching or playing on a TV or other display.

What is the total number of HDMI ports on your display? Do you utilize them all, or are there some that you don’t? What is your preferred method of displaying media? Please share your ideas and experiences with us in the space provided below.

See more :


Best 27-Inch Monitors

Best 29-Inch Monitors

Best 34-Inch Curved Monitor For Work

How To Paint A Skateboard With Acrylic?

When painting your skateboard, you need a place to work where you can get things done quickly. Find a well-ventilated area and put a tarp over it to protect the walls and floors from any spills or splatters.
Now that the area is set up, you can start to get the skateboard ready. You have to take off the bolts, nuts, wheels, and trucks. To paint the skateboard quickly and without getting paint where it doesn’t belong, it’s very important to take off the trucks. Once you’ve taken everything apart, put it somewhere safe so you don’t lose anything.
After you’ve taken everything off the skateboard, you’ll need to sand it down. Put even pressure on the skateboard with sandpaper. To make sure that each part is sanded well, it is best to work on small parts at a time instead of the whole surface.
When you’re done sanding, wipe the surface clean of all the dust. You can do this with a clean, damp cloth or a brush with stiff bristles. If there are any bits of dust left over, they can cause your paint to clump and not be smooth.
You will need to use a filler to fix any damage to the surface. Follow the manufacturer’s instructions for how to use the filler. When the filler is dry, sand it down to make it smooth and the same as the rest of the surface.
When the skateboard’s surface is completely smooth, you can put a primer on it. You can use a primer spray or a primer brush, but for the best results, make sure to apply it to the surface in thin, even layers.

For the best protection and sticking power, you should use two layers of primer. However, you must wait at least 30 minutes for the first layer to dry before applying the second. The second layer of primer will need to dry completely before you can paint. You should wait at least 24 hours before painting.
Once the primer is ready, you can use acrylic paint to paint your skateboard. The paint needs to be put on in thin, even layers, just like the primer. This will keep the paint from cracking and wrinkling and speed up the drying process. Before you can paint another layer, the first one has to be completely dry.
Arteza Acrylic Paints are always my favorite and first choice. They come in so many colors, and the quality is really great. For most of my projects, I use Arteza Paints.

You can paint as many layers as you like, but at least two are highly recommended. If two coats of paint are enough to cover the surface, you can stop. You can add more layers if you think the painting would look better with them. For the best results, make sure that each layer dries for at least an hour.
When you’re done painting, give the acrylic paint 24 to 48 hours to dry before you put a sealant on it. A sealant will give your painting more protection and keep it from getting damaged as you ride.

How to Use Acrylic Paint to Paint a Longboard

A longboard can be painted with acrylic paint the same way a skateboard can. You need to take off the wheels, sand the surface, clean off any dust, and apply a primer. You can use acrylic paint that you paint on with a brush or acrylic spray paint. To get a smooth finish, paint each layer carefully and evenly. Once you’re done and the paint is dry, put a sealant on it.

Do you put a sealant on a skateboard with acrylic paint?

You will need to seal your skateboard’s acrylic paint to make sure it doesn’t get damaged over time. If you don’t seal the paint, it’s likely to chip and scratch, which is something you’ll want to stop from happening.
I strongly suggest that you use Krylon Clear Spray. It protects your paint the best and keeps it from flaking, chipping, and even UV rays when your skateboard is outside.
You can use a number of different things to seal the acrylic paint on your skateboard. You can try to seal it with epoxy resin or a regular acrylic sealant that you know will last and be easy to use. This might be harder to handle, but it will keep your paint and skateboard as safe as possible.


If you want to show who you are by painting your skateboard, you need to make sure you do it right. Acrylic paint is the best choice for this job because it is easy to use and lasts a long time. To keep the paint from wrinkling and cracking, you’ll need to put it on in thin layers. Then, finish with a sealant to give it the most protection.

You can also use spray paint to speed up the painting process or make a cool graffiti design on your skateboard. You should spray the paint on in even layers so that the finish looks the same when you’re done. Also, it’s important to put a sealant on top of spray paint.

Is Microwaving Rubbermaid Safe?

If you are worried about your impact on the environment, you can cut down on the amount of trash you make by switching from single-use bags and wraps to reusable food storage containers from Rubbermaid, Tupperware, and other companies. If you use them smartly, you can also reduce how much food you throw away. If you want to put them in the microwave, you will need to be a little careful.

Concerns About Microwaving in Plastic

Part of the reason it’s nice to store leftovers in plastic containers is that you can put them in the fridge or freezer and then put them in the microwave when you’re ready to eat them again. Some people worry, though, about the idea of microwaving food in plastic. There may be some truth to that: Not all plastics are made to be used in the microwave, so they might not work well there.

Bisphenol A, or BPA, which is a hardening agent, is also in the plastic, which could be a problem. It can get into food if it comes into contact with hot plastic and the food. There is no clear evidence that the levels of BPA allowed in food-safe containers are harmful, but the medical, scientific, and regulatory communities are keeping a close eye on it.

Rubbermaid Containers

In the case of Rubbermaid containers, the company got rid of BPA in 2009 because people were still worried about it. All of its current food storage containers are BPA-free, so unless you just got a bunch of containers from an older relative that are decades old, you shouldn’t have to worry about what you have in your cupboard.

Most Rubbermaid lines are made to go from the fridge to the microwave. For example, the popular line of cheap and light Rubbermaid TakeAlongs can be used in the microwave. If you want to know for sure if a product can go in the microwave, look for the words “microwave-safe” or a microwave logo on the bottom. Either one means that you can use your container in a microwave.

Don’t Microwave Too Hot

It’s not enough to know that your container can go in the microwave. To keep yourself and your food safe, you’ll also need to know how to use the containers right.

When using a microwave, the most important thing to remember is that high heat is not your friend. Rubbermaid containers are made to be safe up to 212 degrees Fahrenheit, which is the temperature at which water boils. After that, they can melt or change shape.

Soup, which is mostly water, will never get above that temperature. Neither will things like leftover vegetables or meatloaf. Fats and sugar can get very, very hot in the microwave, which is not good. You shouldn’t reheat really fatty foods or syrups and sauces with a lot of sugar unless you only do it for a short time and someone is right there to watch. Don’t use your plastic containers to cook things like bacon.

Sometimes You Need to Vent

When you’re reheating food in the microwave is one of those times. Rubbermaid containers have tight-fitting lids to keep food fresh, and if you reheat them with the lid snapped on tight, you’re asking for trouble.

As the food inside gets hotter, the container can get pressurized. This could cause a lot of problems. One is that the lid might blow off and splash food all over your microwave. This is how pressure cookers work, but it can also cause the temperature inside the container to rise above the boiling point, which can damage the container. When you open the lid and all that superheated steam rushes out, there’s also a chance you could hurt yourself.

The trick is to leave at least one corner of the lid open so hot steam can get out. Some Rubbermaid containers, like the Microwave’n Savers, have a vent built into the lid that automatically lets air out when the container is heated. If you can’t see a pressure release vent on the lid of your product, it’s best to assume that you need to vent it by hand.

See more: bestkitchenproducts